| JENCO Cast Iron Mechanical Joint Pipes |
Various lengths as shown. The standard gland kit supplied suits cast iron, please specify if PVC or copper gland kits are required.

| JENCO Cast Iron Mechanical Joint Bends |
The standard gland kit supplied suits cast iron. Please specify if PVC or copper gland kits are required.

| JENCO Cast Iron Mechanical Joint Junctions |
Supplied with two gland kits for standard junctions


| JENCO Cast Iron Mechanical Joint Sockets |
Beaded and slip sockets are available in standard sizes.

A gully provides a water seal to prevent odours and gases from escaping into a building. The disconnector provides disconnection by means of a water seal between waste discharges and the remainer of the sewerage system.

| JENCO Cast Iron Branch Connectors |
Connection piece to allow for new flow points from main pipe.

| JENCO Cast Iron Blank Ends |
A blank end caps off the end of a run of pipe and stops the flow of waste going any further.

| JENCO Cast Iron Level Inlets |

Supplied with all mechanical joint fittings, completing the join between the mechanical joint flange and the application/material to which it is being joined. Includes cast iron ring, T-bolts and nuts and Vee Rubber.

Supplied with all mechanical joint fittings, completing the join between the mechanical joint flange and the application/material to which it is being joined. Includes cast iron ring, T-bolts and nuts and Vee Rubber.

This Multi Vent is used to vent pipes coming out of the ground. The pipe coming out of the ground is usually venting a soil waste line.


To suit PVC to earthenware bush.

| JENCO Red U.T. Rubber Ring |
Generally used in the application of stormwater.


|